Universal Digital Repeater

The Universal Digital Repeater, in conjunction with a Sperry Marin fluxgate sensor, fitted to a compatible magnetic compass and in combination with NAVITWIN IV and/or NAVIPILOT 4000, indicates the corrected magnetic compass heading.

Console or Watertight Housing with bracket

The Universal Digital Repeater is available as a console version and in a watertight housing with bracket attachment and is Type-approved in accordance with the Marine Equipment Directive (MED) 96/98/EC

Overview

 

ENVIRONMENT
 
Vibration
2 Hz to 100 Hz to IEC 60945
Temperature range
-25° C to +70° C
Protection grade
Rear IP32 to DIN 40050, Front IP 65 to DIN 40050
Power
18 to 36 VDC
Power consumption
5 W
Signal input
One RS422 input
NMEA 0183
Heading gyro, heading magnetic, roll, pitch, rate of turn, X-rate, Y-rate, water speed, ground speed, transverse water speed, transverse ground speed, total / daily miles, wind speed, wind angle, rudder angle, depth, air temperature, water temperature, time, revolutions per minute, heave
Lehmkuhl
Heading
Course to Steer Indicator
Steer
Status Input
Opto-coupler, rating 24V / 10 mA freeze mode, 180° heading change mode
Signal Output
One RS422
Protocols VDR
Specified for the Sperry Marine Voyage Data Printer
Status output
Open collector, rating 50 V / 500 mA. Status change according to speed input (threshold can be set in the setup menu)
Front plate
96 x 96 mm to DIN Standard
Depth
145 mm (including cable clearance behind housing)
Width, Height, Depth                                               158 mm, 155 mm, 154 mm
 

Specification

Documents

Request an Offer



9 + 7 = ?