JRC - NCR-333 Navtex Receiver

•Receiving NAVTEX broadcasts
NCR-333 receives NAVTEX broadcasts automatically on 518 kHz and 490 kHz or 4209.5 kHz .
 
•Large screen allows comfortable visibility NCR-333 has a 5.7-inch LCD screen display with clear visibility.
It also provides three different character sizes of display, and can be selected at your convenience.
 
•Message saving function
NCR-333 can store up to 200 message identification codes for 70 hours. Moreover, the stored message of each channel can be saved up to 50 messages permanently.
 
•Automatically receiving station setting function
NCR-333 can select receiving stations automatically on GPS position data is valid.
 
•Permanent storage of data settings NCR-333 can set and store the message type and seashore station that receive to internal memory. The data, therefore, does not need to be re-set, even after power has been turned off.
 
•Dual voltage supply input
NCR-333 can be used on either 24 Voe or 12 Voe vessels.
 
•Self-diagnosis function
NCR-333 has automatic self-diagnosis function. This function allows easy maintenance and high system reliability.
 
•Connection to external equipment NCR-333 can be used with the JRC Total Navigator (ECDIS) and external serial printers.

Receiving frequency
490kHz, 518kHz, 4209.5kHz
Receiving mode
F1B NAVTEX broadcast
Sensitivity
CER better than 1x10-2 at 1uV input to 50Ω antenna
Frequency stability
+/-15Hz
Display
5.7-inch Black & White LCD
Received message storage function
Each Channels : 200 messages
Storage length : 70hours
Interface for external units
Serial Interface : 2ports
(For Printer and Integrated Navigation System)
Power supply
12V - 24V DC