Veinland P2S3 Speed Log Interface

The VEINLAND product range includes a variety of different NMEA expanders and multiplexers to ensure the exchange of navigation data between navigation devices according to IEC 61162. All modules are galvanic isolated and partly secured by a redundant voltage supply. According to NMEA 0183, a differential serial data transmission is available as RS 422.

NMEA expanders distribute received signals e.g. from echo sounder or GPS to up to 12 different receiver. Individual modules can automatically switch to the redundant secondary input if the primary input fails.

NMEA multiplexers collect various data from up to 8 transmitters, bundle and send them to different receivers, e.g. Radar or ECDIS. In addition to the standards, our multiplexers can filter, modify and recalculate the signals as well. Headers and checksums can be changed via the configuration software directly on site during the installation. Special solutions like the calculation of the true wind or invert wind directions by 180 ° are possible.

Our new development includes a fully configurable high-performance 8-channel NMEA matrix with a network interface according to the IEC61162-450 standard.

A big selection of our NMEA products are certified according to the IEC 60945 standard. Special solutions can be developed on request.
 

Overview

The SLIFP2S3 interface is used to convert pulses (200 or 400 pulses per mile) into NMEA messages and vice-versa. The module expands one NMEA input to two NMEA outputs. In addition, it expands one pulse input to two pulse outputs. It can be used for dual axis speed logs.

Specification

 
Power supply
9-32VDC / nom. 24V; 12W
Dimensions
176mm x 104mm x 41mm
Weight
470g
Operating Temperature
-15°C up to +55°C
Interfaces
Power/Prog: 1x 4 poles RM3,5
2x Digital-In, 2x Relay-Out, NMEA-In/Out,
NMEA-Out: 1x 16 poles RM3,5
Data rates
2Digital-In: 5 up to 50VDC/dry contact
2Digital-Out: 24V with Rv=2k4/dry contact
1x Speed Puls; 1x Status
NMEA-In/Out, NMEA-Out according to IEC61162-1
Connections
Connector with terminals up to 1,5mm²
Applications
Conversion of pules into NMEA
Messages and vice-versa
Approval
IEC60945, BSH
Article No.
M0420

Documents

Request an Offer



1 + 6 = ?