Veinland 1NMEAto8RG Expander 8 Channel

The VEINLAND product range includes a variety of different NMEA expanders and multiplexers to ensure the exchange of navigation data between navigation devices according to IEC 61162. All modules are galvanic isolated and partly secured by a redundant voltage supply. According to NMEA 0183, a differential serial data transmission is available as RS 422.

NMEA expanders distribute received signals e.g. from echo sounder or GPS to up to 12 different receiver. Individual modules can automatically switch to the redundant secondary input if the primary input fails.

NMEA multiplexers collect various data from up to 8 transmitters, bundle and send them to different receivers, e.g. Radar or ECDIS. In addition to the standards, our multiplexers can filter, modify and recalculate the signals as well. Headers and checksums can be changed via the configuration software directly on site during the installation. Special solutions like the calculation of the true wind or invert wind directions by 180 ° are possible.

Our new development includes a fully configurable high-performance 8-channel NMEA matrix with a network interface according to the IEC61162-450 standard.

A big selection of our NMEA products are certified according to the IEC 60945 standard. Special solutions can be developed on request.

Overview

The module 1NMEAto8RG is used to distribute data from two alternative NMEA sources to 8 parallel working NMEA transmitters (CH3 to CH11). Through a redundancy circuit, CH1 is switched over to CH2 after about 4 seconds in the absence of input data. At the same time, an error message signaled through a red LED and the alarm relay is opened. The inputs and the outputs are galvanically isolated from each other and the power supply.

Specification

 

Power supply
9-32VDC / nom. 24V; 5W
Dimension
165mm x 85mm x 54mm
Weight
650g
Operating temperature
-15°C up to +70°C
Interfaces
2Power: 1x 3 poles RM5
Error-Out: 1x 2 poles RM5
2NMEA-In: 2x 3 poles RM5
8x1NMEA-Out: 8x 3 poles RM5
Data rates
2NMEA-In according to IEC61162-2/RS422 up to 38400bps
8x1NMEA-Out according to IEC61162-2/RS422 up
to 38400bps
Connections
Connector with terminals up to 2,5mm²
Applications
Distribution and Decoupling of two redundant sources (e.g. GPS and DGPS) to several receivers (e.g. radar)
Options
Brackets for wall mounting
Approval
IEC60945, IACS E10
Article No.
M0136

Documents

Request an Offer



6 + 1 = ?